Στον προηγούμενο η/υ (i3) είχα κάνει τις απαιτούμενες ρυθμίσεις για την κάρτα ήχου του Signalink.
Τώρα με αυτόν (P2) με λιγότερες επιδόσεις πάλι χρειάσθηκε να επαναληφθεί η διαδικασία:
"The Updated Fix: Thankfully you can remove the microphone boost gain added by windows manually and it will stick and be remembered and you will never have to touch it again. In Windows control panel, click sound. Click on the recording tab. Keep an eye on the green level meter next to your radio device. On the radio device, click properties, then go to the levels tab. Right click on the slider and change the value from Percentage to DB. If 100% on the slider reads +30db, you are affected by the bug. If the device was properly enumerated as a line in device, 100% on the slider would be 0db. Now if you have confirmed the device is seen as a microphone and +30db has been added, lower the slider until it reads as close to 0db as possible. The closest you will be able to get is most likely -0.4db or so, which is fine and much better than +30. That's it! Now windows is now longer adding it's own gain, and you can turn your radios AF/USB output and/or signalink RX back up out of its own noise floor."
Ίδωμεν.
είναι μια ευκαιρία για νέες "οντότητες" (χώρες), χρειάζεται προσεκτική ανάγνωση των όρων συμμετοχής και αποστολή του ημερολογίου έγκαιρα.
